DIGITAL ELECTRONICS LAB

It is one of the core laboratories to acquire knowledge upon Digital Electronicsfor the students of various engineering disciplines like ECE, CSE, IT, EIE, IC, EE etc. According to the syllabus prescribed by MAKAUT 3rd semester students design different logical and combinational circuits and observe their characteristics. They gather knowledge by the various method of designing a circuit. They can compare resemble of a circuit with constructed truth table. Ten numbers of equal timing slots in a week are available where 40 students can perform experiment at a time with 20no of experimental setup in equal batch sizes. Several no of faculties and instructors/demonstrators associated with this lab continuously look over to assist students with full enthusiasm.

Major instruments used here are listed below:               

1. Analog/ Digital Trainer kit
2. IC Tester

List of Experiments for Digital Electronic & Integrated Circuits Laboratory (EC-492)

1. Realization of basic gates using Universal logic gates.
2. Code conversion circuits- BCD to Excess-3 and vice-versa
3. 3 Four-bit parity generator and comparator circuits.
4. Construction of simple Decoder and Multiplexer circuits using logic gates.
5. Design of combinational circuit for BCD to decimal conversion to drive 7-segment display using multiplexer.
6. Construction of simple arithmetic circuits-Adder, Subtractor.
7. Realization of RS-JK and D flip-flops using Universal logic gates.
8. Realization of Universal Register using JK flip-flops and logic gates.
9. Realization of Universal Register using multiplexer and flip-flops.
10. Construction of Adder circuit using Shift Register and full Adder.
11. Realization of Asynchronous Up/Down counters.
12. Realization of Synchronous Up/Down counters.
13. Design of Sequential Counter with irregular sequences.
14. Realization of Ring counter and Johnson’s counter.
15. Construction of adder circuit using Shift Register and full Adder.

List of Experiments for Digital Electronics (CS-391)

1. Design a Full Adder using basic gates and verify its output / Design a Full Subtractor circuit using basic gates and verify its output.
2. Construction of simple Decoder & Multiplexer circuits using logic gates.
3. Realization of RS / JK / D flip-flops using logic gates.
4. Design of Shift Register using J-K / D Flip Flop.
5. Realization of Synchronous Up/Down counters.
6. Design of MOD- N Counter.
7. Study of DAC. Any one experiment specially designed by the college.

List of Experiments for Digital electronic circuit laboratory [EC (EE)-391]

1.  1.Study of DAC & ADC
2. Realization of basic gates using Universal logic gates.
3. Realization of RS-JK & D flip-flop using logic gates.
4. Design of Combinational circuit for BCD to decimal conversion to drive 7-segment display using Multiplexer.
5. Realization of Synchronous Up/Down counters.
6. Construction of simple Decoder & Multiplexer circuits using logic gates.
7. Construction of adder circuit using Shift register & Full adder.

List of Experiments for Digital Electronic Circuits Lab [EC(EI) 391]

1.  Realization of basic gates using Universal logic gates.
2. Code conversion circuits- BCD to Excess-3 & vice-versa.
3. 4-bit parity generator & comparator circuits.
4. Construction of simple Decoder & Multiplexer circuits using logic gates.
5. Design of combinational circuit for BCD to decimal conversion to drive 7-segment display using multiplexer.
6. Construction of simple arithmetic circuits-Adder, Subtractor.
7. Realization of RS-JK & D flip-flops using Universal logic gates.
8. Realization of Universal Register using JK flip-flops & logic gates.
9. Realization of Universal Register using multiplexer & flip-flops.
10. Construction of Adder circuit using Shift Register & full Adder.
11. Realization of Asynchronous Up/Down counters.
12. Realization of Synchronous Up/Down counters.
13. Design of Sequential Counter with irregular sequences.
14. Realization of Ring counters& Johnson’s counter.
15. Construction of adder circuit using Shift Register & full Adder.